125V Module
The BMOD0063-P125 (HTM125) module is based on 2.7-volt BOOSTCAP® BCAP3000 Power cells and incorporates proprietary balancing, monitoring and thermal management capabilities to ensure industry-leading charge/discharge performance, high reliability and long operational life. The HTM125 meets or exceeds transportation industry requirements for watt-hours of energy storage and watts of power delivery per kilogram, and is designed to perform reliably through one million or more deep charge/discharge cycles, which equates to more than 15 years of operational life.
Features:
- Over 1 million charge/discharge cycles
- IP 65 environmental protection
- Operating temperature -40° C to +65° C
- CAN bus digital monitoring and communications
- Highest power performance available
- Temperature and voltage monitoring
- Series connection up to 1500V
- E-mark certified for public transportation (B08 model)
Benefits:
- Highest performance hybrid power systems
- Survive in nearly any weather/environmental conditions
- All in one solution with digital monitoring and built-in forced air cooling
- Digital feedback enables optimized hybrid control algorithms
Applications:
- Buses
- Electric trains and trolleys
- Heavy duty transportation
- Cranes, RTGS
- Utility vehicles
- Mining equipment
| CAPACITANCE | BMOD0063-125V |
| Nominal capacitance | 63F |
| Capacitance tolerance | +20% / -0% |
| VOLTAGE | |
| Rated voltage | 125 V DC |
| Surge voltage | 135 V DC |
| Maximum operating voltage | 130 V DC |
| Isolation voltage | 4000 V DC |
| RESISTANCE | |
| ESR, DC (max) | 18 mΩ |
| Thermal resistance (Rth) | 0.032°C/W |
| TEMPERATURE | |
| Operating temperature range | -40°C to +65°C |
| Maximum ambient operating temperature | +50°C |
| Storage temperature range | -40°C to +70°C |
| Temperature characteristics | |
| ΔC within ± 5% of initial measured value at 25°C ( at -40°C) | |
| ΔR within ± 150% of initial measured value at 25°C ( at -40°C) | |
| CURRENT | |
| Leakage current (Ic) | 5.2 mA |
| After 72 hours at 25°C initial leakage current can be higher | |
| Maximum peak current, 1 sec, 10% duty cycle | 750 A |
| Maximum continuous current, with fan cooling | 150 A |
| Assuming 15°C temperature rise above ambient temperature | |
| Maximum continuous current, with convection cooling | 55 A |
| Assuming 15°C temperature rise above ambient temperature | |
| Self discharge % of initial voltage, 30 days RT 100V, 12 hours charge and hold | 50% |
| MONITORING (IN-BUILT) | |
| Balancing (Active Voltage Management System) | VMS |
| Voltage and Temperature Monitoring (B14/B24/B04) | CANBus SAE J1939 |
| Voltage and Temperature Monitoring (B33) | Analog |
| FAN RATINGS | |
| Maximum power for each fan (B14) | 12V / 42W |
| Maximum power for each fan (B24/B33) | 24V / 55W |
| Maximum power for each fan (B04) | No Fan |
| CONNECTION | |
| Positive Terminal | Radsok® |
| Negative Terminal | Radsok® |
| Monitoring connections, see users manual | |
| POWER | |
| Power Density (Pd) | 1,7500 W/kg |
| Pmax | 4,700 W/kg |
| ENERGY | |
| Energy Density (Emax) | 2.53 Wh/kg |
| Energy available as 1/2C (Vnom2 – 1/2Vnom2) /3600 | 101.7 Wh |
| SIZE | |
| Dimensions (L x W x H) (mm), see drawings for full details (B14/B24/B33) | 762 x 425 x 265 |
| Dimensions (L x W x H) (mm), see drawings for full details (B04) | 619 x 425 x 265 |
| Weight (gr) | 59.5 kg |
| LIFESPAN | |
| Lifetime 125 V DC, RT | |
| End of life characterized as -20% C from nominal C, or increase of 100% in ESR | 100,000 hours |
| Endurance | |
| After 1,500 hours application of rated voltage at 65°C. Within % of initial specified value. | |
| Capacitance change | less than 20% decrease |
| Internal resistance change | less than 60% increase |
| Life test | |
| After 10 years at rated voltage and 25°C. Within % of initial specified value. | |
| Capacitance change 20% decrease | |
| Internal resistance 100% increase |
| CYCLES | |
| Cycles 125 V to 62.5 V DC, RT | 1000000 |
| Capacitance change within % of initial specified value. | 20% decrease |
| Internal resistance within % of initial specified value. | 100% increase |
| Environmental resistance | IP65 |
| Environmental resistance for fans | IP55 |
| Shock resistance | SAE J2464 |
| Vibration resistance | EN 61373; ISO16750 Table 14 |
NEW 16v Ultracap
Modules Available
YEG Components are pleased to announce
the availability of the
new range of 16v
modules from Maxwell Technologies Inc. . . .
Other YEG Webstes:
YEG Opto
YEG Powerline
YEG Components
YEG Locator
YEG Powercords
